8 virtual guitar cabinets and natural room ambience combined with pre-amp type, power-amp voicing , cabinet back type and microphone type controls, delivers the cab sim every player has been looking for in a compact pedalboard friendly s...- Read More
8 virtual guitar cabinets and natural room ambience combined with pre-amp type, power-amp voicing , cabinet back type and microphone type controls, delivers the cab sim every player has been looking for in a compact pedalboard friendly size and very easy to use it in real life.
MultiCab MK3.5 Cabinet Simulator – Preamp
Go direct to the PA and the audio interface from your pedalboard with MultiCab MK3 and create a lightweight rig. Use it as an amp DI between your amp and the cabinet to send your true tube tone to the PA. Pair it with a dummy load to practice your tube amp silently at home with headphones and jam with backing tracks by using the AUX input.
The MultiCab MK3.5 lets you do all the above and more without having to deal with any form of software or complex menus and sub-menus. An easy plug’n’play set-up lets you dial in the perfect settings in a matter of minutes.
A mixture of elements from both analog and digital worlds were used to achieve the most realistic response.
While developing the MultiCab MK3.5 we made a conscious decision not to use IR technology. This way, and in conjunction with parallel analog audio path, we managed to create a unit that minimizes latency (not even barely noticeable), providing the most genuine and direct experience possible.
The always active analog path is responsible for the pre-amp modes, power amp voicing, cabinet back type and microphone type voicing, while the parallel digital path is responsible for the 8 guitar cabinet types and the natural room ambience.
The pre-amp (PRE) section was designed with two jfet stages for a tube like response and touch, featuring a versatile tone control and 2 modes (CLEAN & HOT). The power (PWR) section mimics the voicing and feel of a power amp in a push pull topology loaded with EL34 or 6L6 tubes. The cabinetBACKtype section features 3 selections of cabinet back types. The closed back (CLS) setting makes the sound feel more directional with tight and punchy bass. The semi open back (SEM) setting introduces some frequency phases and reflections, making the tone feel fuller with subtly looser bass. The open back (OPN) setting enriches the tone with many complex frequency phases and reflections, contributing to less low-end punch and generally looser bass. The microphone (MIC) section is responsible for the microphone type voicing. The (DYN) setting mimics the frequency response inspired by the Shure™ SM57™ dynamic microphone placed on axis in front of the cab. The (RIB) setting mimics the frequency response inspired by the Royer™ R121™ ribbon microphone placed on axis in front of the cab. The (BOTH) setting mimics the frequency response inspired by both SM57™ & R121™ microphones placed on axis in front of the cab.
8 custom-made virtual guitar cabinets:
The MultiCab MK3.5 features 8 different virtual guitar cabinets heavily inspired on some legendary and iconic guitar amps and cabinets.
1×10: inspired by 1962 Fender™ Princeton™ amp loaded with one 10″ Oxford™ 10J4 speaker
4×10: inspired by 1966 Fender™ Super Reverb™ amp loaded with four 10″ Jensen™ P10R speakers.
1×12: inspired by 1965 Fender™ Deluxe Reverb™ amp loaded with one 12″ Oxford™12K5-6 speaker.
1×12*: inspired by Zilla™ Fatbaby™ closed back cabinet loaded with one 12″ Celestion™ Vintage30™ speaker.
2×12: inspired by 1966 VOX™ AC30-JMI™ amp loaded with two 12″ Celestion™ silver bulldog speakers.
2×12*: inspired by Marshall™ 1936 cabinet loaded with two 12″ Celestion™ G12T-75 speakers.
4×12: inspired by Marshall™ 1960AX angled cabinet loaded with four 12″ Celestion™ G12H-30 greenback speakers.
4×12*: inspired by Mesa Boogie™ Rectifier™ angled cabinet loaded with four 12″ Celestion™ Vintage30™ speakers.
With theAMBIENCEcontrol you can adjust the level of natural room ambience. Imagine having a 3rd microphone, placed away from the cabinet, that captures the reflections from the room in which the cab is placed. Dial it past noon for a warm and small sized reverb effect.
Find the perfect place for the MultiCab MK3.5 depending on your needs. – On your pedalboard. For best results we recommend placing the MultiCab MK3.5 after the overdrive/distortion pedals and before any time based effects (reverb, delay, modulation, etc). This way, you also get to use them in stereo if possible. You can also place it at the end of your board. – Between your amp and cabinet as an amp DI box. Connect the speaker-output of your amp to the IN of the MultiCab MK3.5 and your cabinet to the THROUGH OUT of the pedal, and then from the XLR or LINE out to the PA or a mixer. – After a load box to push the settings of your favorite amp without tearing down the walls of your place.
Practice or even jam along your favorite tunes by connecting a phone/player to theAUXinput. Connect a pair of headphones to theheadphones out and your neighbors won’t even know you are there!
Handmade in Athens, Greece
8 custom-made virtual guitar cabinets
Natural room ambience
2 types of pre-amp with tone control
2 types of power amp voicing
3 types of cabinet back
3 types of microphone voicing
Input gain pad
Balanced XLR and line out
Power Supply : 9V Boss-type DC adapter (center -), 12V ok
Max power consumption : 100mA @ 9V DC
Heavy duty & light weight aluminum box
Dimensions : 130mm(Width) x 96mm(Length) x 63mm(Height)
We accept payments from MasterCard, Visa, Discover, American Express and PayPal. You can read about our financing options here.
What is your shipping policy?
We will ship completed orders Monday-Friday. Orders placed and paid before 1:00pm. PST will ship that same day. All completed orders after the cutoff time will ship the following business day. RGS does not ship on Saturday or Sunday.
What is your return policy?
We offer a 30 day Exchange policy for new purchases. We ask that you please return the product in the original product packaging along with all included materials (manual, warranty card, all accessories) and in the original condition that it was received and we will exchange it for any product on ours site. Please note that we do charge a $5 dollar exchange fee to cover our shipping cost. We are a small business and do not offer a cash refund. We cannot take returns on sealed product. We do not accept returns for guitars and amplifiers under any circumstances. Unfortunately we also cannot cancel orders or pre-orders. We are happy to exchange for another product if you are no longer interested in the new release or backordered items